Model： UT-6408W
● Supports full/half duplex mode, auto negotiation
● Auto 10/100Mbps
● Supports crossing-identification, no need manual operation
● Built-in store-and-forward, supports multiple protocols
● Transmission data max. support 1518 bytes
● Complied with Telecom operation standard, MTBF>500,000 hours
● Auto alarm function, via FAIL, relay output
● Dual DC power input, overload protection
UT-6408W is an industrial unmanaged Ethernet switch with 8 fast Ethernet ports. It supports DC input reverse polarity protection; this protects the device from burning. UT-6408W supports industrial standard Din-Rail and wall-mounted installation; it is easy to be installed at any industrial field.
>>Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseT(X)和100Base FX
>>Interface
RJ45 port：8 x10/100BaseT（X） ports，auto detection, full/half duplex, auto MDI/MDI-X
LED indicator: PWR1, PWR2, FAIL, RJ-45
Alarm contact: 1 channel relay output, NONC, 1A@24VDC
>>Power requirement
Input voltage: 12-48 VDC，redundancy dual power input
Power consumption: Max. 2.5 Watts
Terminal block: 1 pluggable 6-pin terminal block
Overload protection: Yes
Reverse polarity protection: Yes
>>Mechanical Characteristics
IP rating：IP30
Installation: Din-Rail/wall-mounted
Dimension(W x H x D): 150mm×37mm×100mm
>>Environment
Operating temperature：-40℃～85℃
Storage temperature：-40℃～85℃
Relative humidity：5～95% (non-condensing)
>> Industrial standards
EMI: FCC Part 15 Subpart B classA, EN55022 class A
EMS:
IEC(EN)61000-4-2(ESD)，level 3
IEC(EN)61000-4-3(RS)，level 3
IEC(EN)61000-4-4(EFT)，level 3
IEC(EN)61000-4-5(Surge)，level 3
IEC(EN)61000-4-6(CS)，level 3
IEC(EN)61000-4-8
IEC 60068-2-27(Shock)
IEC 60068-2-32(Freefall)
IEC 60068-2-6(Vibration)
Follow Us:
Skype