Model: UT-60008F series
● Supports up to 8 100Mbps ports
● Supports different Ethernet/fiber ports combination
● Supports full-duplex or half-duplex, auto negotiation
● Auto 10/100Mbps
● Auto MDI/MDI-X
● Built-in store-and-forward, 8k buffer
● Compatible with Telecom standards, MTBF>500,000 hours
● SC connector (with optional ST/FC)
● FAIL relay output auto alarm function
● Redundant dual power input, overload protection
UT-60008F series are unmanaged industrial Ethernet switches. It supports up to 8 100M ports, plug & play. This switch is low power consumption; the fanless design prevents it from noise interference; the operating temperature range is from -40~85°C. These make it provides safe and reliable solution for industrial automation, intelligent transportation, video transmission, and other industrial application networking.
Remarks:
1. Single-mode dual-fiber SC port is a standard configuration for products above mentioned, with optional ST/FC
2. The suffix “F” in “MNF” means 12/24/48VDC(10.8~52.8VDC)power input;
The suffix “D” in “MND” means 110/220VAC/DC(88~264VAC/DC)dual power input
>>Standards
IEEE 802.3
IEEE 802.3u
>>Ports
Fiber port: 100Base-FX(SC/FC/ST)
RJ45 port: 10/100Base-T(X), auto MDI/MDI-X
Transmission distance
Cat.5e: 100m
>>Fiber Patch Cord
Single-mode: 1,310nm 20/40/60Km
1,550nm 20/40/60/80/100/120Km
Multi-mode: 1,310nm 2Km
>>Switching Performance
Forwarding rate: 148,810pps
Transmission mode: store-and-forward
MAC address buffer: 8K
Switching bandwidth: 1.6G
>>Power Requirement
Voltage input: with optional 12/24/48VDC(10.8~52.8VDC)and 110/220V AC(88~264VAC)/50-60Hz or 110/220VDC(88~264VDC), supports redundant dual power input
>>Consumption
Rated power: 15W
>>Mechanical Characteristics
IP rating: IP40
Installation: DIN-Rail/wall-mounted
>>Dimension
Size(W×H×D): 150mm×47.6mm×100mm
>>Environment
Operating temperature: -40℃~85℃
Storage temperature: -40℃~85℃
Relative humidity: 0~95% (non-condensing)
>>Industrial Standards
EMI: FCC Part 15, CISPR (EN55022) class A
EMS:
IEC(EN)61000-4-2(ESD)
IEC(EN)61000-4-3(RS)
IEC(EN)61000-4-4(EFT)
IEC(EN)61000-4-5(Surge)
IEC(EN)61000-4-6(CS)
IEC 60068-2-27(Shock)
IEC 60068-2-32(Freefall)