Products
Home > Unmanaged Switch > DIN-Rail Unmanaged

Product name: UOTEK 8+4G Gigabit Unmanaged Ethernet Switch

Model: UT-60408F series

● Supports full-duplex or half-duplex, auto negotiation

● Auto 10/100Base-T(X), auto MDI/MDI-X

● Built-in store-and-forward, 8K buffer, supports multiple protocols

● Operating temperature: -40~85℃

● IP40 protection

● Relay output auto alarm function

● dual power input, overload and reverse polarity protection

● Compatible with telecom standard, MTBF>300,000 hours

Overview

UT-60408F series are unmanaged industrial Ethernet switches. It supports up to 12 ports, which included 4 Gigabit fiber ports(SC/ST/FC/SFP slot); this enhances the networking flexibility. This switch is low power consumption; the fanless design prevent it from noise interference; at the same time, the operating temperature range is from -40~85℃; and the switch is with good EMC compatibility. These make the switch provides safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial application networking access.


Remarks:

1. Single-mode dual-fiber SC port is a standard configuration for 100M optic ports of products above mentioned, with optional ST/FC

2. The suffix “F” in “BNF” means 12/24/48VDC(10.8~52.8VDC)power input;

    The suffix “D” in “BND” means 110/220VAC/DC(88~264VAC/DCdual power input


Parameter

>>Standards

IEEE 802.3, IEEE 802.3u


>>Ports

Fiber port:  100Base-FX(SC/FC/ST)

                  1000Base-X(SC/FC/ST)

RJ-45 port: 10/100Base-T(X), auto MDI/MDI-X


>>Transmission Distance

Cat.5e: 100m


>>Fiber Patch Cord

Single-mode: 1,310nm   20/40/60Km

                     1,550nm   20/40/60/80/100/120Km

Multi-mode:   1,310nm   2Km


>>Switching Performance

Forwarding rate:

100M ports: 148,810pps

1000M ports: 1,488,095pps

Transmission mode: store-and-forward

MAC address buffer: 8K

Switching bandwidth: 9.6G


>>Power Requirement

Voltage input: with optional 12/24/48VDC(10.8~52.8VDC) and 110/220VAC(88~264VAC)/50-60Hz or 110/220VDC(88~264VDC)


>>Power Consumption

Fullload: <20W


>>Mechanical Characteristics

IP rating: IP40  

Installation: DIN-Rail


>>

Dimension

Size(W×H×D): 150 mm×70mm×120mm


>>Environment

Operating temperature: -40℃~85

Storage temperature: -40℃~85

Relative humidity: 0~95%(non-condensing)


>>Industrial Standards

EMI: FCC Part 15, CISPR (EN55022) class A

EMS:

IEC(EN)61000-4-2(ESD)

IEC(EN)61000-4-3(RS)

IEC(EN)61000-4-4(EFT)

IEC(EN)61000-4-5(Surge)

IEC(EN)61000-4-6(CS)

IEC 60068-2-27(Shock)

IEC 60068-2-32(Freefall)

Download
Message
Return