Products
Home > Unmanaged Switch > DIN-Rail Unmanaged

Product name: UOTEK 16+4G Gigabit Unmanaged Ethernet Switch

Model: UT-60416F series

● Supports full-duplex or half-duplex, auto negotiation
● Supports 10/100Base-T(X), auto detection, auto MDI/MDI-X

● Built-in store-and-forward, 8k buffer

● Operating temperature: -40~75℃

● IP rating: IP40

● Relay output auto alarm function

● Redundant dual power input, nonpolarity, overload and reverse polarity protection

● Compatible with Telecom standards, MTBF>300,000 hours

Overview

UT-60416F series are unmanaged industrial Ethernet switches. It supports up to 20 ports, which included 4 Gigabit fiber ports; this enhances the networking flexibility. This switch is low power consumption; the fanless design prevent it from noise interference; the operating temperature range is from -40~85℃, and it is with good EMC compatibility. These make the switch provides safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial application networking access.


Remarks:

1.     Single-mode dual-fiber SC port/SFP slot is a standard configuration for products above mentioned, with optional ST/FC

2.     The suffix “F” in “BNF” means 12/24/48VDC(10.8~52.8VDC)power input;

       The suffix “D” in “BND” means 110/220VAC/DC(88~264VAC/DCdual power input

 


Parameter

>>Standards
IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab


>>Ports
Fiber ports: 100Base-FX(SC/FC/ST)
                    1000Base-X(SFP slot)
RJ-45 ports: 10/100Base-T(X), auto MDI/MDI-X


>>Transmission Distance
Cat. 5e: 100m


>>Fiber Patch Cord
Single-mode: 1,310nm   20/40/60Km
                     1,550nm   20/40/60/80/100/120Km
Multi-mode:  1,310nm   2Km


>>Switching Performance

Forwarding rate:

100M ports: 148,810pps

1000M ports: 1,488,095pps
Transmission mode: store-and-forward
MAC address buffer: 8K
Switching bandwidth: 11.2G


>>Power Requirement
Voltage input: 110/220VAC(88~264VAC)/50-60Hz or 
                       110/220VDC(88~264VDC) 
supports redundant dual power input


>>Power Consumption
Rated power: 20W


>>Mechanical Characteristics
IP rating: IP40 
Weight: <2000g
Installation: DIN-Rail


>>Dimension
Size(W×H×D): 150 mm×70mm×120mm


>>Environment
Operating temperature: -40℃~75
Storage temperature: -40℃~75
Relative humidity: 0~95%(non-condensing)


>>Industrial Standards
EMI:
FCC Part 15, CISPR (EN55022) class A
EMS:
IEC(EN)61000-4-2(ESD) 
IEC(EN)61000-4-3(RS)
IEC(EN)61000-4-4(EFT) 
IEC(EN)61000-4-5(Surge) 
IEC(EN)61000-4-6(CS) 
IEC 60068-2-27(Shock)

IEC 60068-2-32(Freefall)


Download
Message
Return