The UT-6405SA is a 5-port 100M unmanaged Ethernet switch that provides DC input positive and negative protection to prevent burnout of the instrument. It has a compact design and supports industrial standard DIN-rail mounting, it is easy to install in any industrial network application.

>>Protocol Standards

IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,

>>Interfaces

RJ45 interface: 5* 10/100/Base-TX, auto-detection, full/half duplex, auto MDI/MDI-X 

>>Switching Performance

Forwarding rate: 148810pps

Transmission mode: store and forward

MAC address size: 1K

Cache size: 448Kb

Backplane bandwidth: 1.6G

>>Power Requirement

Voltage input: 12/24/48VDC(10.8~52.8VDC)

Interface terminal: 1 pluggable 3-pin terminal block

Overload protection: Support

Reverse connection protection: Support

>>Mechanical Characteristics

IP protection level: IP40

Installation: DIN-Rail Mounted

>>Power consumption

120mA@24Vmax

>>LED indicator light

PWR power indicator, Network indicator

>>Mechanical Dimension

Dimension (W x H x D): 100mm x 80mm x 40.2mm

Weight: 500g

Packaging dimension: 190mm x 182mm x 65mm

>>Operating Environment

Operating temperature: -40 ~ 85°C

Storage temperature: -40 ~ 85°C

Relative humidity: 0~95% (non-condensing)

>>Industrial Standards

EMI:

FCC Part 15 Subpart B classA，EN55022 class A

EMS:

IEC(EN)61000-4-2(ESD)

IEC(EN)61000-4-3(RS)
IEC(EN)61000-4-4(EFT)

IEC(EN)61000-4-5(Surge)
IEC(EN)61000-4-6(CS)

IEC(EN)61000-4-8

IEC 60068-2-27(Shock)
IEC 60068-2-32(Freefall)
IEC 60068-2-6(Vibration)