UT-6801BC supports data conversion from serial terminal to TCP/IP. It realizes transparent bi-directional data transmission between RS-232 port and TCP/IP Ethernet port, which enables the serial device to have networking functions. UT-6801BC integrated with ARP, IP, TCP, HTTP, ICMP, UDP and other protocols. The setup wizard makes you easy to operate it. It is widely used in industrial control, industrial automation, IoT, environmental monitoring, intelligent transportation, dynamic monitoring and other related fields.

Protocol

ARP, IP, ICMP, UDP, TCP, HTTP, DHCP, MODBUS

Operating mode

VCOM, MCP, TCP Server, TCP Client, UDP Client, Modbus TCP Server, Modbus TCP Client

Serial port

RS-232

Baud rate: 300~921,600bps

Check bit: None, Odd, Even

Data bit: 5, 6, 7, 8

Stop bit: 1, 2

Interface

Power port: 1*DC power jack, 1*2 pin 5.08 terminal block, with built-in reverse protection

Ethernet port: 1*RJ45, 1*10/100/Base-T(x)

Serial port: 1*DB9 male(RS232)

LED indicator: PWR, RUN, DATA, serial port indicators

Button: 1 RESET button

Power requirement

Voltage input: DC5-12V

Power consumption: Max. 0.5W

Mechanical characteristic

IP rating: IP30

Net weight: 132g

Installation: Wall mounting

Dimension (LxWxD): 79x72x21mm

Transmission distance

RS-232: 15m

Operating environment

Operating temperature: -40~85℃

Storage temperature: -40℃~85℃

Relative humidity: 5%～95% (non-condensing)

Industrial standard

EMC: EN 55032/24

EMI: CISPR 32, FCC Part 15B Class A

EMS:

IEC(EN)61000-4-2(ESD), contact 4KV, air 8KV

IEC(EN)61000-4-3(RS), 3V/m

IEC(EN)61000-4-4(EFT), power 1KV, signal 0.5KV

IEC(EN)61000-4-6(CS), 3V/m