UT-6808MT supports data conversion from serial terminal to TCP/IP. It realizes transparent bi-directional data transmission between RS-232/485/422 port and TCP/IP Ethernet port, which enables the serial device to have networking functions. UT-6808MT integrated with ARP, IP, TCP, HTTP, ICMP, UDP and other protocols. The setup wizard makes you easy to operate it. It is widely used in industrial control, industrial automation, IoT, environmental monitoring, intelligent transportation, dynamic monitoring and other related fields.

Protocol

ARP, IP, ICMP, UDP, TCP, HTTP, DHCP, MODBUS, SNMP, MQTT

Operating mode

VCOM, MCP, TCP Server, TCP Client, UDP Client, Reverse Telnet, Remote Pair Slave, Remote Pair Master, Modbus TCP Server, Modbus TCP Client, MQTT, RFC2217

Serial port

RS-485, RS-422

Baud rate: 300~921,600bps

Check bit: None, Odd, Even, Mark, Space

Data bit: 7, 8

Stop bit: 1, 2

Interface

Power port: 1*DC power jack, 1*3-pin 5.08 terminal block, with built-in reverse protection

Ethernet port: 1*RJ-45, 1*10/100/Base-T(x)

Serial port: 8* 3.81 terminal block (RS232/485/422)

LED indicator: PWR, RUN

Button: 1 RESET button

Power requirement

Voltage input: DC12-48V

Power consumption: Max. 5.4W

Mechanical characteristic

IP rating: IP30

Net weight: 480g

Installation: Desktop/wall mounting

Dimension (LxWxD): 161x37x91mm

Transmission distance

RS-485/422: 1,200m

Operating environment

Operating temperature: -40~85℃

Storage temperature: -40℃~85℃

Relative humidity: 5%～95% (non-condensing)

Industrial standard

EMC: EN 55032/24

EMI: CISPR 32, FCC Part 15B Class A

EMS:

IEC(EN)61000-4-2(ESD), contact 6KV, air 8KV

IEC(EN)61000-4-3(RS), 3V/m

IEC(EN)61000-4-4(EFT), power 2KV, signal 1KV

IEC(EN)61000-4-5(Surge), power 2KV, signal 0.5KV

IEC(EN)61000-4-6(CS), 3V/m