UT-6405GCA POE Series is a 5-port unmanaged Gigabit Ethernet switch, which supports 4 POE(IEEE 802.3af/at) ports. It also supports reverse polarity protection. The industrial standard DIN-rail/wall mounting design makes it easy to install in any industrial network applications. The switch offers three working modes: Extend, Standard, and VLAN mode, it also supports POE watchdog function and POE power consumption limitation function. All these solve the problem of device clash when working or restart

Standard

IEEE 802.3 af/at

IEEE 802.3 10Base-T

IEEE 802.3u 100Base-T(X)

IEEE 802.3ab 1000Base-T

IEEE802.3x

Interface

RJ-45 port: 5* 10/100/1000Base-T, ports 1-4 support POE function

POE power: +(1, 2) pins, -(3,6) pins

LED indicator

PWR, RJ-45, POE indicators

Switch property

Forwarding rate: 1,488,095pps

Transmission mode: Store-and-forward

MAC address space: 2K

Cache size: 1Mb

Switching bandwidth: 10G

Maximum frame length: 16KB

Power requirement

Input voltage: 48VDC (46~57VDC)

Interface terminal: 1 pluggable 3-pin

Overload protection: Support

Reverse polarity protection: Support

Power consumption

Single POE port up to 30W, total power consumption not exceed to 60W

DIP function

VLAN mode: ports 1-4 are isolated from each other and can only communicate with the uplink port; network storm suppression; flow control is disabled.

CCTV mode: downlink port self-negotiate with a speed reduction of 10M, with the farthest transmission distance of 250 meters.

POE LIM mode: POE power consumption limitation, each port is limited to 30W(IEEE802.3at powered model); while power over 30W, the port will stop to power for the PD; while exceed to the full load POE power consumption, there is priority on power: 4th port is the top priority, and then 3rd port, 2nd port, 1st port. 

POE WDT mode: the switch auto-detect the PD working status, and will restart the PD device if in abnormal status.

Mechanical characteristic

IP rating: IP40

Installation: DIN-Rail\Wall-mounting

Dimension(W x H x D): 125mmx30mmx90mm

Packaging dimension

250mmx205mmx55mm

Operating environment

Operating temperature: -40℃ ~ 75℃

Storage temperature: -40℃ ~ 85℃

Relative humidity: 0 ~ 95% (non-condensing)

Industrial standard

EMI: FCC Part 15 Subpart B classA, EN55022 class A

EMS:

IEC(EN)61000-4-2(ESD)

IEC(EN)61000-4-3(RS)

IEC(EN)61000-4-4(EFT)

IEC(EN)61000-4-5(Surge)

IEC(EN)61000-4-6(CS)

IEC(EN)61000-4-8

IEC 60068-2-27(Shock)

IEC 60068-2-32(Freefall)

IEC 60068-2-6(Vibration)